Five Coating Systems · Shelbyville, KY
Shelbyville Commercial Roof Coating Services
Our commercial roof coating services in Shelbyville cover five systems, with metal roof coating first. A roof walk decides which one goes on your building.
- One Roof Walk, Five Options
- System Matched To The Roof
- Prep Listed Before Pricing
Commercial Roof Coating Services In Shelbyville
Each card names the roof the system fits and the one detail that decides it.
Metal Roof Coating
Exposed-fastener and standing seam roofs on warehouses, shops, and barns, with every screw, lap, and rust spot handled before the coat.
Deciding detail: firm steel and purlins.
Metal roof coating details
Silicone Roof Coating
Low-slope metal and flat roofs that hold water after rain, plus late-season jobs when cool, damp days rule out acrylic.
Deciding detail: water that stays put.
Silicone roof coating details
Acrylic Roof Coating
Steep panel roofs, barns, and canopies that drain fast and sit over people or animals, where low odor and easy recoats matter.
Deciding detail: a warm, dry cure window.
Acrylic roof coating details
Spray Foam Roofing
Uninsulated shops and barns with condensation, or roofs leaking at nearly every rib, where foam adds insulation and a thick barrier.
Deciding detail: curbs and gutters that can rise.
Spray foam roofing details
Shingle Roof Coating
Asphalt shingle sections on strip centers, offices, and churches, coated only when the shingles and both makers pass the checks.
Deciding detail: flat shingles with granules left.
Shingle roof coating detailsWhich System Fits Which Roof
The roof you have points to the system. Find the closest row, then we confirm it on a roof walk.
| Roof You Have | Usual System | Why |
|---|---|---|
| R-panel warehouse leaking at screws | Metal roof coating with an acrylic or silicone finish | The steel is firm and the leaks sit at joints |
| Low-slope metal with puddles behind units | Silicone roof coating | It keeps its grip in standing water |
| Steep barn or canopy over people or horses | Acrylic roof coating | Low odor, fast drainage, simple recoats |
| Uninsulated shop dripping condensation | Spray foam roofing with a topcoat | Insulation keeps the steel warmer |
| Strip center with flat-lying shingles | Shingle roof coating, after maker checks | Coating extends shingles that still lie flat |
| Panels rusted through or purlins sagging | Panel or frame repair first | Coating needs solid steel under it |
Not Sure Which System Your Roof Needs?
Call us with the roof type, the slope, and what is going on inside. We can narrow it to one or two systems before the roof walk.
How Every Coating Job Starts And Finishes
The system changes from roof to roof, while the order of work holds. These four steps apply to metal, silicone, acrylic, foam, and shingle jobs.
Inspect Your Roof
We walk the roof and the space underneath, note the slope, the substrate, standing water, and condensation, and photograph every leak source we find.
Pick The System
The inspection points to metal coating, silicone, acrylic, foam, or a shingle coating, or to repairs first, and the prep list is written for that choice.
Prep For That System
Washing, rust primer, fastener and lap work, curb flashing, drying wet areas, or shingle repairs all happen before any finish goes on.
Apply And Measure
Coatings go on at the maker's rate and foam at its planned thickness, with gauges and gallon counts confirming the work section by section.
Questions About Choosing A System
Answers that help sort one system from another.
Choosing
Should I coat, restore, re-panel or replace a metal roof?
It comes down to how much steel is still solid and how the frame and insulation fit your plans. Coat when panels are firm and leaks sit at screws and laps. Restore when a few panels or skylights need swapping first. Re-panel when rust is widespread, and replace when purlins or insulation have failed.
Does a new coating have to match what is already on the roof?
Compatibility matters more than matching. Factory paint, old acrylic, old silicone, and bare galvanized steel each need their own approach, and old silicone is the hardest, since few products bond to it except more silicone. An adhesion test patch on the worst areas settles it.
Application
How is the coating applied to the roof?
By airless spray or roller, in one or two coats, after seams and fasteners are detailed. Spray covers ribbed panels faster, while rollers give more control near property lines, parked cars, and air intakes. Ribs, laps, and ridge caps get extra passes, and wet mils are checked with a gauge as the work goes.
What shortens the life of a coating on a metal roof?
Thin film, standing water, and skipped upkeep wear a coating out early. Thin spots show first on ribs and ridge caps, water collects at low eaves and behind rooftop units, and neglect shows as cracked sealant at skylight panels and pipe boots. A yearly walk catches them while touch-ups still work.
Schedule And Code
How long does a metal roof coating job take?
Roof size, rust and fastener prep, weather, and cure time set the schedule more than spraying does. On a large R-panel roof, washing and screw work can outlast both coats. Work runs in sections so each area is sealed before the crew leaves, and an inspection of the actual roof sets a realistic timeline.
Which building code covers commercial roof work in Kentucky?
The Kentucky Building Code applies statewide, administered by the Department of Housing, Buildings and Construction alongside local inspectors. On metal roofs the questions center on the coating assembly's fire classification, wind attachment of new panels and trim, and how edge metal and gutters are secured. Rooftop HVAC changes follow a separate mechanical permit path.
Get A Free Estimate For Any Coating System
Tell us about the roof, and we will recommend one system after we have walked it.